DESCRIPTION
The S108 swing beam cutting press is like the SE Series simple to use with easy adjustment of the cutting stroke, an operator can switch between multiple height cutting dies without any setting or adjustment. Unlike the SE swing beam the S108 has a 3 push button cutting power selection rack, this means that as an operator moves from a smaller die to a larger tool (surface area) rather then adjust the cutting power settings, any 1 of 3 buttons can be used on the left push button console to achieve an accurate cut.
The cutting power is easily adjusted if required through the movement of a two potentiometers on the cutting beam, the smaller of the two adjusts the 1st button of the 3 and the larger controls the 3rd push button. The 2nd push buttons cutting power is an average taken between the smaller and larger settings. The control push buttons are ergonomic, so allowing the operator increased comfort. The push buttons are controlled by a two hand safety relay, meaning the buttons need to be activated 5/10ths/sec between each other too allow cutting stroke activation, and requires constant activation to maintain a cut stroke.
SPECIFICATIONS
- Size (mm): 600x690x1330
- Cutting Table (mm): 600x300
- Travelling Head Size (mm): 300
- Maximum Power (t - kN): 8-78
- Net Weight (kg): 430
VIDEO
